Filters (60)

Set Descending Direction

SLX PLUS Filter - 4 to 6 Bar

Features- 2.5 BAR standard with 3.75 BAR test pressure- 4.0 BAR / 6.0 BAR available- Complete with 3- sight glass- Complete with side manhole- Flange connection ports as standard- 1.5- BSP fitting for air relief valve- Drain port- 1m bed depth- Integral underdrains- Vinylester option available- SLX for quick replacement

Commercial Split Tanks

Ideal for retrofitting the Commercial Split Tank filter is delivered in two parts and assembled onsite in the plant room. The two halves seal perfectly, using a double -O' ring and are held together by a flange using nuts and bolts.The filter is specifically designed to fit through existing standard sized plant room doors.Features- Unique split tank design- Lateral underdrains- 2.5 BAR operating pressure- Flow rates up to 40m3/m2/hr- Flange connections

OC-1 Commercial Filters

The Commercial OC-1 filter is supplied complete with the OC-1 media already preloaded and allows quicker installation and avoids having to load sand or glass into the tanks on site. Features:The Commercial OC-1 filter is manufactured from bobbin wound fibreglass and polyester resin; and comes with a specialist OC-1 distribution and collection system. It comes with a gauge and media sight glass and service hatch are available as optional extras. Technical Information:Working Pressure: 2.5 bar Test Pressure: 1.5 x working pressureMax Temp: 50OC Bolt down lidOC-1 media really excels in the commercial sector. Potential savings in running costs come from the ability to reduce pump speeds and reduced backwashing. Add to that the advantage for new installations of the filter arriving with the media already installed and you can see that OC-1 is the obvious choice for the commercial application. Why YOU should switch to OC-1 Reduces energy consumption – OC-1 maintains constant flow rates, even when the media becomes dirty. No downtime is required for heating/salt chlorinators/heat pumps going out on low flow. The constant flow means pumps can be run at lower speeds, thus saving energy.  Huge capacity for debris collection – OC-1 offers over 20 times the capacity of sand or glass.  Reduced requirement for backwashing and a more efficient backwash - Reduces water consumption, chemical usage and heating.  Lightweight - Can even be shipped inside a filter, easy to handle and super quick and easy to install.  Less Maintenance - lasts longer than sand, reduces pressure in the system, extending the life of equipment.  Filters to International swimming pool standards.  Suitable for ALL installations - domestic or commercial, outdoor or indoor, new installations or existing filters.  Recyclable at end of product life.  Payback typically 12-18 months.

TLX Steel Filters

Designed from experience working in the industrial water treatment sector, TLX filters are recognised for their strength, high resistance to corrosion and design flexibility. Bespoke filters can be produced to suit specifications including varying bed depths, steel plate thickness and port positions.Typical uses include municipal swimming pool filtration, commercial fish farming, water process industries and chemical treatment plants.Standard features- Top and side manhole access- BS4504 PN10/16 flanges- Internal protective epoxy coating- Primed sand painted exterior finish- Integral lifting eyes- Filtration rate 30 m3/m2/hr- 2.5 BAR max. working pressure- 4.0 BAR test pressureOptions- Nozzle plate or lateral arms underdrain system- Sight glass - Rubber linings for ozone treatment- Alternative pressure ratings

HLX Commercial Filter

The HLX range is manufactured with a liner employing special resins which form a watertight, anti-corrosive barrier, giving high resistance to chemicals. It is also suitable for salt water pools. An outer fibre glass shell isthen applied to the liner, using the bobbin winding process - this gives the finished tank its final working and test ratings. The standard filter is manufactured with a polyester shell. For ozone systems a vinylester shell is available upon request. The HLX comes with a pressure gauge panel.Working pressure: 2.5kg/cm2 / 35.56 psi / 2.45 BARTest pressure: 3.75kg/cm2 / 53.3 psi / 3.68 BARSpecial working pressure: 4kg / cm2Maximum temperature: 50 deg CAvailable options: Bed depths 0.6m, 1m and 1.2mFeatures- Polyester shell lining- Polypropylene arm collectors- PVC distribution pipework- 400mm diameter bolted top access hatch- 400mm diameter side access hatch- Automatic air relief valve- Sand and water drain port- Flanged inlet and outlet connections- Pressure gauge panel

Pneumatic Butterfly Valves

All automatic valve battery sets are supplied loose and supplied with steel supports and pressure gauge panel.

Motorised Butterfly Valves

All automatic valve battery sets are supplied loose and supplied with steel supports and pressure gauge panel.

Control Panel for Valve Sets

Control panel for automatic valve set motorized or pneumatic (one panel per battery set required)

Unistrut Valve Support Systems

Page: