Chemical Equipment & Testing (58)

Set Descending Direction

Service, Installation & Training

Installation, commissioning and training is available for all of our chemical dosing equipment. Our dedicated team of dosing engineers can ensure that systems are set up and continue to run safely and efficiently for years to come. The information below outlines the available packages and are Trade only cost (exclusive of VAT).Free On Site SurveyDon't forget that we offer free, no obligation, on-site surveys that will allow us to specify not only the equipment but the level of service plus training that will be required. To arrange a visit to your site, please contact the CertiChem team or complete the pool/spa questionnaire at the back of this section.Service Visits - Planned Preventative MaintenanceService visit orPlanned Preventative Maintenance (PPM) form an essential part to the smooth running of any chemical dosing system. The frequency of visits will depend on your facility, bather load and own maintenance schedule. Please speak with a member of the CertiChem team to discuss your requirements fully.Prices quoted based on UK Mainland only. For overseas including Channel Islands, Isle of Wight and the Isle of Man, please contact the CertiChem team.Service visits typically consist of 1 working day per visit. Service spares charged as extra. Prices are based on one monitoring and control system. Service contracts payable in advance.Call Outs (Emergency and Non-Emergency)As well as the above we offer one off emergency and non emergency call out packages. Costs will depend entirely on the nature of the call out and time spent on site. The -initial call out fee' covers travel to and from site plus the first hour on site. Plesae contact CertiChem with postcode. We reserve the right to price accordingly.Prices quoted based on UK Mainland only. For overseas including Channel Islands, Isle of Wight and the Isle of Man, please contact the CertiChem team. Service spares charged as extra.

Redox Dosing Systems

Redox Based SystemsRedox based systems indicate the Oxidation Reduction Potential (ORP) of the water and not directly the quantity of sanitiser (oxidant) present.ORP is an indication of the activity level of the sanitiser and can be used to control a set point to safe guard bathers. ORP (Redox) can be used in conjunction with amperometric systems which can then show both the ppm level and activity of the sanitiser (displayed as a mV value).The systems shown offer an economical method of monitoring the pool or spa water quality and are best suited to domestic applications.Installation, Commissioning & TrainingAll prices for Redox Based Dosing Systems allow for our installation, commissioning and introductory training service in the mainland UK only. Any area or country outside of the mainland UK will incur extra cost which we would be happy to provide a quotation for upon request**Free On-Site SurveyCertikin offer a free, no obligation, on-site survey to specify equipment and training required. To arrange a visit to your site, please contact the CertiChem team for more information.* Pumps (where applicable), tanks and other accessories are required in order to form a complete system. See page 319 for more information** Approved installers can purchase equipment for self installation at a reduced cost

Feeder Output Dosing Systems

Feeder Output SystemsTablet feeders or salt chlorinators can be directly -plugged in' to the integrated socket in the controller making it ideally suited to both domestic and light commercial applications.Controllers with feeder sockets are available with ORP probes; open amperometric cells or closed amperometric probes.Installation, Commissioning & TrainingAll prices for Feeder Output Dosing Systems allow for our installation, commissioning and introductory training service in the mainland UK only. Any area or country outside of the mainland UK will incur extra cost which we would be happy to provide a quotation for upon request**Free On-Site SurveyCertikin offer a free, no obligation, on-site survey to specify equipment andtraining required. To arrange a visit to your site, please contact the CertiChemteam for more information.* Pumps (where applicable), tanks andother accessories are required in order to form a complete system. See page 319 for more information** Approved installers can purchase equipment for self installation at a reduced cost

Open Cell Dosing Systems

Open Cell SystemsOpen amperometric cells offer a relativley low cost method of automating the monitoring of the chlorine residual (displayed in ppm) of a water sample.Broadly speaking, most applications are suited to an open amperometric cell. However, the cells functionality depends on a constant flow and pressure across the sample block. Also, the cells output can be affected by other factors such as combined chlorine, stabilisers and other oxidants.Installation, Commissioning & TrainingAll prices for Open Cell Systems allow for our installation, commissioning and introductory training service in the mainland UK only. Any area or country outside of the mainland UK will incur extra cost which we would be happy to provide a quotation for upon request**Free On-Site SurveyCertikin offer a free, no obligation, on-site survey to specify equipment andtraining required. To arrange a visit to your site, please contact the CertiChemteam for more information.* Pumps (where applicable), tanks and other accessories are required in order to form a complete system. See page 319 for more information** Approved installers can purchase equipment for self installation at a reduced cost

Closed Probe Dosing Systems

Closed Probe SystemsClosed Amperometric Chlorine Probe systems offer the most accurate free chlorine residual measurement available (displayed in ppm).The probe has an ion selective membrane which only allows the hypochlorous ion to enter the probe sensor area. This means that only the hypochlorous ions contribute to thesignal output which results in a highly accurate reading.Installation, Commissioning & TrainingAll prices for Closed Probe Systems allow for our installation, commissioning and introductory training service in the mainland UK only. Any area or country outside of the mainland UK will incur extra cost which we would be happy to provide a quotation for upon request**Free On-Site SurveyCertikin offer a free, no obligation, on-site survey to specify equipment andtraining required. To arrange a visit to your site, please contact the CertiChemteam for more information.* Pumps (where applicable), tanks and other accessories are required in order to form a complete system. See page 319 for more information** Approved installers can purchase equipment for self installation at a reduced cost

Heavy Use Commercial Dosing Systems

Heavy Use Commercial CertiDos PRCA commercial grade system giving pH and chlorine monitoring and control. The system also features a Redox (mV) monitor for general analysis of the water quality (display only). The system uses closed amperometric probes to give the most accurate measure of the levels available.CertiDos M5A complete sampling and monitoring panel featuring a 5 channel controller offering pH, ORP, Free Chlorine, Total Chlorine and Combined Chlorine. The MAX5 offers a comprehensive monitoring solution for a commercial facility.Installation, Commissioning & TrainingAll prices for Commercial Systems allow for our installation, commissioning and introductory training service in the mainland UK only. Any area or country outside of the mainland UK will incur extra cost which we would be happy to provide a quotation for upon request**Free On-Site SurveyCertikin offer a free, no obligation, on-site survey to specify equipment andtraining required. To arrange a visit to your site, please contact the CertiChemteam for more information.* Pumps (where applicable), tanks and other accessories are required in order to form a complete system. See page 319 for more information** Approved installers can purchase equipment for self installation at a reduced cost

Carbon Dioxide Dosing

Carbon Dioxide (CO2) is increasingly being used for pH control within the swimming pool industry. When injected or diffused into the pool water, the CO2 forms a mild carbonic acid for pH control as well as forming natural bicarbonate which assists in the stabilisation of the pH level.Why CO2-CO2 offers a number of advantages over the mineral acids such as sodium bisulphate andhydrochloric acid:- CO2 is colourless, odourless and a non-flammable gas. It is easy to handle and dose and is dangerous only if released into a confined area. It requires no special protective equipment- Under COSHH regulations a pool operator must carry out a risk assessment in selecting the chemicals to use in a pool. The first step is to ascertain whether using an alternativeprocess or chemical can eliminate the risk - CO2 scores on this count- Deliveries are unlikely to result in emergencies because of spillages and, where ventilation is good, CO2 does not demand any special safety monitoring for leakage- Unlike mineral acids, itis not possible to mix CO2 with sodium or calcium hypochlorite(in liquid form) through spillage in bunds or operator error. This means there is no possibility of accidental production of chlorine gas - a significant hazard in swimming pool installations- Due to its natural buffering action, CO2 provides improved process control. pH reduction is more gradual than with mineral acids making accurate control inherently easier but sometimes slower.CO2 InjectorAn essential part of any CO2 system - the injector. The injector has been specifically designed so that the injection quill / defuser can easily be removed for cleaning without the need to isolate the circulation line.CO2 Flow ControllerAn IP rated enclosure which allows adjustment of CO2 flow to the injection point. Supply can be connected to CertiChem controllers for automatic control based on pH water parameters.

Dosing Pumps

We supply a wide range chemical dosing pumps including wall mounted solenoid driven dosing pumps with various features ranging from manual, automatic and pulse proportional control and foot mount dosing pumps. All Certikin dosing pumps are designed to integrate with Certikin controllers or can be used independently.For more information on our dosing range and to help select product suitable for your application, please download the Certikin Dosing Brochure below, or contact our sales team for assistance.

Dosing Probes and Accessories

We have a full range of probes, probe holders, buffer solutions, amperometric cells and solenoid valves to complete your dosing package. For more information on our dosing range and to help select product suitable for your application, please download the Certikin Dosing Brochure below, or contact our sales team for assistance.

Page: