Filters (19)

Set Descending Direction

Vision Filter with 10 lid"

The Certikin Vision has been developed by Certikin with some unique features. Vision filters are available in both top and side mount versions. The Top Mount Vision filter features a clear valve mounting ring that allows a clear view of filtration and backwashing during operation. The Side Mount Vision features a clear 10 lid for ease of maintenance and a clear view of filtration and backwashing during operation. Features- Patented 10- lid for ease of maintenance- 10 year tank warranty for residential installations - Bobbin wound using the latest in fibreglass winding technology- Clear mounting ring on top mount models - allowing a clear view of filtration and backwashing during operation- Multiport valve comes complete with 1.5" and 50mm quick connect unions- Hydraulically balanced laterals to maximise water flow and filtration - Automatic internal air bleed to expel any unwanted air in the tank - Max working pressure 2.5 bar - Also available as a 4 bar model"

Brasil Filter

The Brasil is a blow moulded filter made from anthracite grey HDPE. It is equipped with a 6 way valve, pressure gauge and drain valve and is available with either a top mount or a side mount valve. Its maximum working pressure is 2kg/cm2.Available in a wide range of diameters to accommodate different pool sizes.

Brasil Filter c/w Side Mount Valve &am…

The Brasil is a blow moulded filter made from anthracite grey HDPE. It is equipped with a 6 way valve, pressure gauge and drain valve and is available with either a top mount or a side mount valve. Its maximum working pressure is 2kg/cm2.Available in a wide range of diameters to accommodate different pool sizes.

OC-1 Domestic Filters

The Domestic OC-1 Filter comes ready for the media to be installed and is easy to ship and quick to install. These bobbin wound OC-1 filters have a two year warranty on the tank only then pro-rata up to 10 years. Why YOU should switch to OC-1 Reduces energy consumption – OC-1 maintains constant flow rates, even when the media becomes dirty. No downtime is required for heating/salt chlorinators/heat pumps going out on low flow. The constant flow means pumps can be run at lower speeds, thus saving energy.  Huge capacity for debris collection – OC-1 offers over 20 times the capacity of sand or glass.  Reduced requirement for backwashing and a more efficient backwash - Reduces water consumption, chemical usage and heating.  Lightweight - Can even be shipped inside a filter, easy to handle and super quick and easy to install.  Less Maintenance - lasts longer than sand, reduces pressure in the system, extending the life of equipment.  Filters to International swimming pool standards.  Suitable for ALL installations - domestic or commercial, outdoor or indoor, new installations or existing filters.  Recyclable at end of product life.  Payback typically 12-18 months.

Trimline Cartridge Filters

Trimline cartridge filters are constructed from high impact polypropylene and are designed for easy maintenance to give you years of trouble free service. The body is constructed from a single mould, eliminating any possible leaks and the filtration element is made from heavy duty easy to clean polyester fabric. The rugged non-corrosive construction of Trimline cartridge filters allows their use in fresh or salt water.Trimline comes with a ten year warranty: five years tank warranty and five years pro rata and 1 year warranty on all other components for domestic installations. Commercial applications attract a 1 year tank warranty.The filter cartridge is easily cleaned by hosing the pleats with a standard garden hose.

Filter Media

There is a variety of filtration media available including sand, glass, gravel, diatomaceous earth and Zeoclere (zeolitic media). Ensure that the filter media selected is suitable for the filter and the application.ZeoclereThis filter media gives years of service along with water clarity 60% better than sand. It is ideal for leisure centre, school, hotel, and hydrotherapy pools. A straight swap from sand, Zeoclere removes ammonia and heavy metals from pool water. It has achieved NSF61 - NSF50 - NSF50ii certification.Glass Bead Filter MediaGrade 1 glass beads have a small effective size of only 0.6mm to 0.8mm. Its narrow particle size range allows in-depth filtration and extends operating cycles between backwashing. They have been laboratory tested to be able to effectively filter down to below 3 microns and are spherical and do not have any sharp edges. They are safe to handle and safe to service and are manufactured from 100% virgin glass and are chemically inert.The spherical smooth shape results in a low co-efficient of friction reducing its backwash water requirements and backwash with up to 20% less waterthan sand, saving time and water. Glass beads are easy to install and enable a rapid start-up of the media filter. It high purity means very little backwashing is required to cleanse the filter media prior to commissioning the filter. Certikin Glass Filter MediaThis environmentally friendly filter media is made from a glass recycled in the UK. It is a viable alternative to sand and does not involve intrusive mining and the use of scarce resources. It is available in three grades - all grades are milled down to remove sharp points and are packed in 25kg bags.Glass media is more efficient than sand as it can remove up to 30% more material and pollutants than sand so saving on backwashing and the resultant water, energy and chemical treatment costs. It doesn't degrade so has a longer life span.Use in place of traditional filter media. Grade 1 is equivalent to 16/30 grade sand; Grade 2 is equivalent to 8/16 grade sand; Grade 3 is equivalent to 6mm gravel.

OC-1 Filtration Media

Unlike traditional methods that use entrapment, OC-1 works through settlement and harnesses advances in pump technology and variable speed pumps/controllers. The new British manufactured filtration media has some exceptional benefits - by replacing commonly used media (such as sand and glass) with OC-1 it is possible to reduce the head loss in the filtration system; filter with a constant flow (regardless of debris entrapment) and, most remarkably, significantly reduce running energy costs whilst still filtering to the equivalent standard as it can be used with a smaller pump or a variable speed pump or controller.Why YOU should switch to OC-1- Reduces energy consumption – OC-1 maintains constant flow rates, even when the media becomes dirty. No downtime is required for heating/salt chlorinators/heat pumps going out on low flow. The constant flow means pumps can be run at lower speeds, thus saving energy. - Huge capacity for debris collection – OC-1 offers over 20 times the capacity of sand or glass. - Reduced requirement for backwashing and a more efficient backwash - Reduces water consumption, chemical usage and heating. - Lightweight - Can even be shipped inside a filter, easy to handle and super quick and easy to install. - Less Maintenance - lasts longer than sand, reduces pressure in the system, extending the life of equipment. - Filters to International swimming pool standards. - Suitable for ALL installations - domestic or commercial, outdoor or indoor, new installations or existing filters. - Recyclable at end of product life. - Payback typically 12-18 months.

Pressure Gauges

This selection of pressure gauges each have a 0.25 male BSP thread."

Multiport Valves

Our multiport valve selection includes models for most current domestic swimming pool filters. Which valve should I use-First identify the type (brand) of filter that you require the valve for. Is the valve mounted to the side of the filter (side mount) or does it attach directly to the top of the filter (top mount)- Next establish the size of the pipework connections to the valve. With this information, you will then be able to select the correct valve from the list shown.

Page: