Besgo Automatic Backwash Valve C/W Solenoid

• Manufactured in Switzerland, the Besgo valve is a hydraulic drive system controlled by a single 240v solenoid.
• When powered the valve opens and forces the hydraulic system into an alternative position, directing water through a different route. Activate the solenoid again and the system will return to its original state, thus providing automated switching from filtration to backwash and vice versa.
• Features:
• 3 to 5 bar mains water pressure or compressed air required to actuate the valve
• The solenoid can be controlled by several methods. eg timed, pressure, manual etc.
• In the event of power failure the valve remains in its closed position (normal filtration) therefore preventing accidental emptying of the pool.
• Closed in less than 2 seconds
• Silent operation
• No pressure hammer
• Low pressure loss
• With power failure valve is shut
• No need to turn the pump off